2-3t/h wood pellet making line case

The wood log can be crushed by wood chipper machine into chips and its size is 2-5cm.

By using the MACREAT Triple-pass dryer, the moisture of the chips will be reduced to 15%.

Project Profile

Factory location: Indonesia

Purpose: processing wood waste to make pellets

Raw material: wood waste such as plywood

Estimated investment budget: 160,000 USD EXW factory

Raw Material Descriptions
Wood SpeciesMaterial ShapeParticle Size (L*W*T) mmMoisture% of Supplied
WoodsWood log8*5*2mm≤50%100%
Pellet Quality Requirement
Pellet size 1Pellet size 2Pellet size 3Other
Pellet diameter  mm8mm
Fines  %≤2.5%
Additives  %≤0.05%
Plant Capacity and Operating Hours
Plant Size24*50*10m(W*L*H)
Pellet size 1Pellet size 2Pellet size 3Other
Oper. days yearly300 days
Oper. hrs daily12 hours
Capacity ton/h2-2.5tons/h
Electricity
Frequency50Hz
Main Supply Voltage380V
Max Available Power at Site (kVA)600kVA

Pellet Making Process

Chipping Process

The wood log can be crushed by wood chipper machine into chips and its size is 2-5cm.

Drying Process

By using the MACREAT Triple-pass dryer, the moisture of the chips will be reduced to 15%.

Crushing Process

The chips can be crushed by Hammer Mill into sawdust and its size is 3-6mm.

Pellet Making Process

The sawdust can be squeezed by Pellet Mill into pellet and its diameter and length can be adjusted.

Cooling Process

The pellet can be cooled down naturally by stock bin. For quick process, cooler can be optional.

Packing Process

The pellet is packed and stock for use.

Diagram Display

Reviews

There are no reviews yet.

Be the first to review “2-3t/h wood pellet making line case”

Your email address will not be published. Required fields are marked *

Scroll to Top