1-1.5t/h Wood Pellet Making Line Case

Chipping Process, The plywood strip can be crushed by wood chipper machine into chips and its size is 2-5cm.

Crushing Process, The chips can be crushed by Hammer Mill into sawdust and its size is 3-6mm.

1-1.5T/H Wood Pellet Making Line Case

Project Profile:

Purpose: Disposal plywood waste for their own factory use

Plant Location: China

Purpose: Disposal plywood waste for their own factory use

Raw Material: Plywood Waste

Estimated Investment Budget: $80000 EXW Factory

Plant Capacity and Operating Hours
Plant Size24*50*10m(W*L*H)
Pellet size 1Pellet size 2Others
Oper. days yearly300daysdaysdays
Oper. hrs daily12hourshourshours
Capacity ton/h1tons/htons/htons/h
Raw Material Descriptions
Wood SpeciesMaterial ShapeParticle Size (L*W*T) mmMoisture% of Supplied
1PoplarStrip1100*500*200≤10%60%
2PoplarPowder≤10%40%
Electricity
Frequency:50Hz      ±0.2%60Hz         ±0.2%Others
Main Supply Voltage380 V 415 VOthers
Max Available Power at Site (kVA)600kVA

Pellet Quality

Pellet size 1Pellet size 2Pellet size 3
Pellet diameter  mm8mmmmmm
Fines  %≤2.5%%%
Additives  %≤0.05%%%

Pellet Making Process

1.Chipping Process

The plywood strip can be crushed by wood chipper machine into chips and its size is 2-5cm.

2.Crushing Process

The chips can be crushed by Hammer Mill into sawdust and its size is 3-6mm.

3.Pellet Making Process

The sawdust can be squeezed by Pellet Mill into pellet and its diameter and length can be adjusted.

4.Cooling Process

The pellet can be cooled down naturally by stock bin. For quick process, cooler can be optional.

5.Packing Process

The pellet is packed and stock for use.

Wood Pellet Making Line Diagram Display

Wood Pellet Making Line Site Photos

Scroll to Top